Traditional
Hot Rod Motors!
!

Dream Catcher

1959 Chevrolet Apache with the works!  
Full AccuAir Elevel Air Ride, Vintage Air Cold AC and LS Motor!


Drive Train and Frame

-LS motor and Trans from a 2003 Tahoe with approx. 80k miles. 5.3 motor and 4L60e trans. Motor and Trans are stock.

-2 1/2" dual exhaust with 40 series flowmasters. Holly hooker LS Swap headers.

-20 gallon fuel cell, Stainless 6an fuel lines and fittings going to and from motor. Fuel lab filters and Walbro 255 external fuel pump. Pressure gauge at motor on intake.

-Ford explorer 8.8 rear end 3.73 posi. Camaro rally wheels, Shaved white wall tires. New pads and rotors. Rotors have been drilled out to 5x5.75 bolt pattern.

-1977 Camaro front clip welded to the frame. All new steering components and bushings. New power steering pump. 1.25" sway bar up front. New calipers and rotors up front.

-CPP 1/4" stainless steel brake lines from front to back and New CPP firewall brake booster for 4 wheel disc brakes.

-Full Air ride. Accuair Air ride management with VU4 manifold, elevel sensors, and controller. Ride Tech Shock waves up front on Camaro clip and 2600 bags in the rear. Dual 400 viair compressors with 5 gallon aluminum air tank.

-Frame has been step notched in the rear by professional shop with trailing arms and a panhard bar (similar to Hales speed shop setup).

-Aluminum Radiator Setup for LS Swap with 3000 cfm electric fan and billet overflow container.

-Ididit steering column, stainless steering shaft and joints going to the power steering box. Billet steering wheel.

-Lokar 16" floor shifter and Lokar floor ebrake kit.

-Brand new driveshaft and ujoints.

Electrical

-Brand new "EZ 21 circuit" wiring harness

-New radio and custom kick panel speakers. Prewired for amp and sub behind seat.

-Brand new Vintage air conditioning.

-Computer for motor was remapped and harness was rewired by SpearTech for LS Swap. Computer for LS motor is hidden behind instrument panel.

-Dakota Digital LED instrument panel. Lights up blue. OBDII converter that plugs into computer harness that reads and send data from computer to instrument panel.

-Brand New Optima yellow top battery.

-New Headlight bulbs, turn lights and covers, and rear brake light cover and trim. New housings and cover for rear turn signals.

Body and Interior

-Pinstripping was recently added. Some pictures do not show it but I have included two pictures with the Pinstripping.

-Body was completely removed from truck. Under cab was sanded and coated with two coats of POR15 and black bedliner spray.

-New cab corners on both sides. New rockers both sides. New lower fender patches both sides. New lower inner door panels both sides. New Roll pan.

-Frame was sanded and coated with 2 coats of POR15 and a coat of black epoxy.

-Bed floor was raised to support the air ride. Inner bed lifts up to access fuel cell and air ride components. New fender tubs. Custom panel that displays "APACHE" when you lower the tailgate.

-Exterior paint was blended and coated in certain areas where new panels were placed to blend the patina.

-Chevy cobalt blue on the interior and GM white on lower dash and door panels.

-New carpet with eastwood sound and heat barrier on floorboard. 2 coats on POR15 on floorboard.

-Bench seat from 1983 Chevy truck that has been reupholstered.

-New Vent window assys both sides, new door glass and front windshield. All new window gaskets and door gaskets.

-Brand new hood hinges.

Website Builder